Australian Made Scaffolds

Scaffold Assembly

Following is the erection procedure for assembling or dismantling a mobile scaffold with a platform level up to 3.6m in height. Above this height the erection or dismantling shall be supervised or carried out by a person having the required Certificate of Competency.

scaffold safety instructions scaffold safety instructions

Lay out the braces where the scaffold is to be errected:Two(2) Horizontal Braces (yellow)
One(1) Plan Brace (red)

scaffolding mobile perth scaffolding mobile perth

Stand one(1) base frame upright, lock the castors and attach the horizontal braces (yellow) to the vertical tube as shown. Repeat the proceedure with the second base frame then attach the plan brace (red) to square the unit.

western australia scaffolding western australia scaffolding

Connect two(2) diagonal braces (blue) to either side of the structure and level unit by adjusting screw jacks. Note: 0.75m wide scaffold has one(1) diagonal brace (blue) per side.

aluminium western australia aluminium western australia

Place a single platform in position at the 1.6m level.

quality mobile hire quality mobile hire

Connect to each 1.6m upper frame the guard rail frame and stand up against the tower at each end.

scaffolding perth hire scaffolding perth hire

Climb up onto the platform at 1.6m and then lift and place into position both frames. Now fit two(2) diagonal braces (blue) per side, within the 1.6m frames.

scaffold assembly safe scaffold assembly safe

Standing on the platform at 1.6m, now install one(1) standard platform and one(1) safe-hatch platform at the 3.6m level.

perth wa aluminium perth wa aluminium

Install the access ladder so that it protrudes through the safe hatch to the top of the guardrail.

services install ladder rail services install ladder rail

Climb ladder and then fit guard rail bracing.

platform brace castor wa platform brace castor wa

Install kick boards

scaffolding perth aluminium scaffolding perth aluminium

If using the scaffold in an exposed area (outside) then the platform height should not exceed two(2) times the least base dimension. Outriggers can be attached to increase the base dimension, inturn allowing the platform to be raised accordingly.

Use single outriggers if working against a building or structure.

hire quality scaffolding hire quality scaffolding

If using the scaffold in an sheltered area (inside) then the platform height should not exceed three(3) times the least base dimension. Outriggers can be attached to increase the base dimension, inturn allowing the platform to be raised accordingly.

Use double outriggers if working in an open area away from a building or structure.